Elevation of Bel Air South, Maryland, United States of America

Bel Air South, Maryland, United States of America is 99 m (325 ft) above sea level.

Bel Air South's height from sea level is 99 metres, or 325 feet. GeoNames reads 96 m at the same point (SRTM); Wikidata records 107 m.

Ground within 5 km

30 m – 126 m

Mean 83 m across the 9 km square centred on the town, 96 m from its lowest cell to its highest.

Rank by elevation

13th of 22

among the towns of Maryland, and 562nd of 1,000 in United States of America.

Nearest town

Towson

26.9 km to the SW, at 137 m, 38 m higher.

Cross-section through Bel Air South

Ground elevation along two lines through the town, 25.5 km end to end, one cell (about 1 km) per step. The red dot is Bel Air South; the vertical scale is the same on both.

West to east: from 129 m at 13 km west to 27 m at 13 km east.

North to south: from 93 m at 13 km north to 0 m at 13 km south.

Shaded relief of the 53 km around Bel Air South, drawn from the GMTED2010 grid — Relief, 53 km across, north up; the ring marks the town.

Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.

Towns near Bel Air South

Town	Distance	Direction	Elevation	Compared
Towson	26.9 km	SW	137 m (449 ft)	+38 m
Dundalk	33.1 km	SW	12 m (39 ft)	−87 m
Baltimore	34.7 km	SW	19 m (62 ft)	−80 m

Peaks and passes near Bel Air South

Mount Felix, peak at 142 m (466 ft), 17.7 km to the NE — 43 m above the town.
Mount Ararat, peak at 129 m (423 ft), 22.4 km to the NE — 30 m above the town.
Bald Friar, peak at 115 m (377 ft), 24.2 km to the N — 16 m above the town.

Summit heights from GeoNames (CC BY 4.0), within 25 km; only summits higher than the town are listed.

Where Bel Air South is

Latitude 39.504033, longitude -76.3181. Open the map here to read the elevation of any point around the town.

Put this on your site

<a href="https://www.altitude-maps.com/city/227_71,Bel+Air+South,Maryland,United+States+of+America"><img src="https://www.altitude-maps.com/embed/227_71.svg" width="240" height="60" alt="Bel Air South elevation: 99 m (325 ft) above sea level"></a>

A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.

About this reading

The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Bel Air South's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 96 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep. Wikidata's figure is the one its editors cite for the town, often from a survey marker or the town hall.