Elevation of Bilzen, Limburg, Belgium
Bilzen, Limburg, Belgium is 61 m (200 ft) above sea level.
Bilzen's height from sea level is 61 metres, or 200 feet. GeoNames reads 53 m at the same point (SRTM); Wikidata records 53 m.
Ground within 4 km
Mean 69 m across the 8.3 km square centred on the town, 72 m from its lowest cell to its highest.
Cross-section through Bilzen
Ground elevation along two lines through the town, 23.5 km end to end, one cell (about 1 km) per step. The red dot is Bilzen; the vertical scale is the same on both.
Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.
Towns near Bilzen
| Town | Distance | Direction | Elevation | Compared |
|---|---|---|---|---|
| Hoeselt | 3.1 km | SW | 75 m (246 ft) | +14 m |
| Zutendaal | 8 km | NE | 94 m (308 ft) | +33 m |
| Diepenbeek | 8.4 km | NW | 44 m (144 ft) | −17 m |
| Kortessem | 9 km | W | 53 m (174 ft) | −8 m |
| Riemst | 9.1 km | SE | 107 m (351 ft) | +46 m |
Where Bilzen is
Latitude 50.8718971, longitude 5.5167162. Open the map here to read the elevation of any point around the town.
Put this on your site
A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.
About this reading
The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Bilzen's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 53 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep. Wikidata's figure is the one its editors cite for the town, often from a survey marker or the town hall.