Elevation of Banse, Laborie, Saint Lucia

Banse, Laborie, Saint Lucia is 84 m (276 ft) above sea level.

Banse's height from sea level is 84 metres, or 276 feet.

Ground within 5 km

0 m – 295 m

Mean 95 m across the 10.1 km square centred on the town, 295 m from its lowest cell to its highest.

Rank by elevation

7th of 11

among the towns of Laborie, and 52nd of 129 in Saint Lucia.

Nearest town

Banse la Grace

0.3 km to the NE, at 84 m, the same elevation.

Cross-section through Banse

Ground elevation along two lines through the town, 28.3 km end to end, one cell (about 1 km) per step. The red dot is Banse; the vertical scale is the same on both.

West to east: from 0 m at 14 km west to 0 m at 14 km east.

North to south: from 194 m at 14 km north to 0 m at 14 km south.

Shaded relief of the 59 km around Banse, drawn from the GMTED2010 grid — Relief, 59 km across, north up; the ring marks the town.

Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.

Towns near Banse

Town	Distance	Direction	Elevation	Compared
Banse la Grace	0.3 km	NE	84 m (276 ft)	same
Morne Le Blanc	1.3 km	S	53 m (174 ft)	−31 m
Grace (Vieux Fort)	1.7 km	NE	72 m (236 ft)	−12 m
Laborie	1.8 km	SW	87 m (285 ft)	+3 m
La Grace	1.8 km	SW	87 m (285 ft)	+3 m

Peaks and passes near Banse

Mount Gimie, peak at 950 m (3,117 ft), 11.9 km to the N — 866 m above the town.
Gros Piton, peak at 786 m (2,579 ft), 10.9 km to the NW — 702 m above the town.
Petit Piton, peak at 739 m (2,425 ft), 12.1 km to the NW — 655 m above the town.

Summit heights from GeoNames (CC BY 4.0), within 25 km; only summits higher than the town are listed.

Where Banse is

Latitude 13.7608333, longitude -60.98. Open the map here to read the elevation of any point around the town.

Put this on your site

<a href="https://www.altitude-maps.com/city/180_29,Banse,Laborie,Saint+Lucia"><img src="https://www.altitude-maps.com/embed/180_29.svg" width="240" height="60" alt="Banse elevation: 84 m (276 ft) above sea level"></a>

A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.

About this reading

The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Banse's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here.