Elevation of Salinas Victoria, Nuevo León, Mexico
Salinas Victoria, Nuevo León, Mexico is 440 m (1,444 ft) above sea level.
Salinas Victoria's height from sea level is 440 metres, or 1,444 feet. GeoNames reads 447 m at the same point (SRTM).
Ground within 5 km
Mean 465 m across the 9.7 km square centred on the town, 183 m from its lowest cell to its highest.
Cross-section through Salinas Victoria
Ground elevation along two lines through the town, 27.3 km end to end, one cell (about 1 km) per step. The red dot is Salinas Victoria; the vertical scale is the same on both.

Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.
Towns near Salinas Victoria
| Town | Distance | Direction | Elevation | Compared |
|---|---|---|---|---|
| Carmen | 7.7 km | SW | 483 m (1,585 ft) | +43 m |
| Ciénega de Flores | 13.1 km | E | 406 m (1,332 ft) | −34 m |
| Fraccionamiento Real Palmas | 15.2 km | SE | 392 m (1,286 ft) | −48 m |
| Hidalgo | 15.7 km | W | 567 m (1,860 ft) | +127 m |
| Santa Rosa | 17.6 km | SE | 432 m (1,417 ft) | −8 m |
Peaks and passes near Salinas Victoria
- Cerro del Topo Chico, peak at 1,000 m (3,281 ft), 21.9 km to the S — 560 m above the town.
Summit heights from GeoNames (CC BY 4.0), within 25 km; only summits higher than the town are listed.
Where Salinas Victoria is
Latitude 25.9638922, longitude -100.2942166. Open the map here to read the elevation of any point around the town.
Put this on your site
About this reading
The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Salinas Victoria's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 447 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep.