Elevation of Seaforth, Queensland, Australia

Seaforth, Queensland, Australia is 14 m (46 ft) above sea level.

Seaforth's height from sea level is 14 metres, or 46 feet. GeoNames reads 10 m at the same point (SRTM).

Ground within 5 km

0 m – 124 m

Mean 19 m across the 9.9 km square centred on the town, 124 m from its lowest cell to its highest.

Rank by elevation

165th of 218

among the towns of Queensland, and 777th of 1,000 in Australia.

Nearest town

Marian

26.6 km to the S, at 43 m, 29 m higher.

Cross-section through Seaforth

Ground elevation along two lines through the town, 27.8 km end to end, one cell (about 1 km) per step. The red dot is Seaforth; the vertical scale is the same on both.

West to east: from 8 m at 14 km west to 0 m at 14 km east.

North to south: from 0 m at 14 km north to 128 m at 14 km south.

Shaded relief of the 58 km around Seaforth, drawn from the GMTED2010 grid — Relief, 58 km across, north up; the ring marks the town.

Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.

Towns near Seaforth

Town	Distance	Direction	Elevation	Compared
Marian	26.6 km	S	43 m (141 ft)	+29 m
Mirani	30.5 km	S	54 m (177 ft)	+40 m
Walkerston	30.9 km	S	22 m (72 ft)	+8 m
Mackay	35.1 km	SE	4 m (13 ft)	−10 m
Bakers Creek	38.6 km	SE	7 m (23 ft)	−7 m

Peaks and passes near Seaforth

Mount Blackwood, peak at 639 m (2,096 ft), 16.7 km to the S — 625 m above the town.

Summit heights from GeoNames (CC BY 4.0), within 25 km; only summits higher than the town are listed.

Where Seaforth is

Latitude -20.9008534, longitude 148.9664637. Open the map here to read the elevation of any point around the town.

Put this on your site

<a href="https://www.altitude-maps.com/city/12_786,Seaforth,Queensland,Australia"><img src="https://www.altitude-maps.com/embed/12_786.svg" width="240" height="60" alt="Seaforth elevation: 14 m (46 ft) above sea level"></a>

A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.

About this reading

The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Seaforth's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 10 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep.