Elevation of Beaconsfield Upper, Victoria, Australia

Beaconsfield Upper, Victoria, Australia is 212 m (696 ft) above sea level.

Beaconsfield Upper's height from sea level is 212 metres, or 696 feet. GeoNames reads 208 m at the same point (SRTM); Wikidata records 208 m.

Ground within 5 km

58 m – 235 m

Mean 144 m across the 9.1 km square centred on the town, 177 m from its lowest cell to its highest.

Rank by elevation

52nd of 196

among the towns of Victoria, and 286th of 1,000 in Australia.

Nearest town

Emerald

8.5 km to the N, at 305 m, 93 m higher.

Cross-section through Beaconsfield Upper

Ground elevation along two lines through the town, 25.7 km end to end, one cell (about 1 km) per step. The red dot is Beaconsfield Upper; the vertical scale is the same on both.

West to east: from 28 m at 13 km west to 193 m at 13 km east.

North to south: from 244 m at 13 km north to 11 m at 13 km south.

Shaded relief of the 54 km around Beaconsfield Upper, drawn from the GMTED2010 grid — Relief, 54 km across, north up; the ring marks the town.

Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.

Towns near Beaconsfield Upper

Town	Distance	Direction	Elevation	Compared
Emerald	8.5 km	N	305 m (1,001 ft)	+93 m
Pakenham	10.3 km	SE	34 m (112 ft)	−178 m
Cockatoo	10.5 km	NE	232 m (761 ft)	+20 m
Gembrook	13.7 km	NE	306 m (1,004 ft)	+94 m
Koo-Wee-Rup	22.6 km	S	8 m (26 ft)	−204 m

Peaks and passes near Beaconsfield Upper

Mount Dandenong, peak at 1,276 m (4,186 ft), 20.4 km to the N — 1,064 m above the town.

Summit heights from GeoNames (CC BY 4.0), within 25 km; only summits higher than the town are listed.

Where Beaconsfield Upper is

Latitude -38.005211, longitude 145.410797. Open the map here to read the elevation of any point around the town.

Put this on your site

<a href="https://www.altitude-maps.com/city/12_71,Beaconsfield+Upper,Victoria,Australia"><img src="https://www.altitude-maps.com/embed/12_71.svg" width="240" height="60" alt="Beaconsfield Upper elevation: 212 m (696 ft) above sea level"></a>

A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.

About this reading

The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Beaconsfield Upper's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 208 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep. Wikidata's figure is the one its editors cite for the town, often from a survey marker or the town hall.