Elevation of Bannockburn, Victoria, Australia

Bannockburn, Victoria, Australia is 118 m (387 ft) above sea level.

Bannockburn's height from sea level is 118 metres, or 387 feet. GeoNames reads 116 m at the same point (SRTM).

Ground within 5 km

54 m – 141 m

Mean 101 m across the 9.1 km square centred on the town, 87 m from its lowest cell to its highest.

Rank by elevation

103rd of 196

among the towns of Victoria, and 425th of 1,000 in Australia.

Nearest town

Teesdale

11.4 km to the W, at 117 m, 1 m lower.

Cross-section through Bannockburn

Ground elevation along two lines through the town, 25.7 km end to end, one cell (about 1 km) per step. The red dot is Bannockburn; the vertical scale is the same on both.

West to east: from 120 m at 13 km west to 76 m at 13 km east.

North to south: from 156 m at 13 km north to 167 m at 13 km south.

Shaded relief of the 54 km around Bannockburn, drawn from the GMTED2010 grid — Relief, 54 km across, north up; the ring marks the town.

Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.

Towns near Bannockburn

Town	Distance	Direction	Elevation	Compared
Teesdale	11.4 km	W	117 m (384 ft)	−1 m
Inverleigh	12.5 km	SW	67 m (220 ft)	−51 m
Geelong	20.1 km	SE	16 m (52 ft)	−102 m
Lara	20.7 km	E	14 m (46 ft)	−104 m
Moriac	21.8 km	S	94 m (308 ft)	−24 m

Peaks and passes near Bannockburn

Station Peak, peak at 335 m (1,099 ft), 24.3 km to the NE — 217 m above the town.

Summit heights from GeoNames (CC BY 4.0), within 25 km; only summits higher than the town are listed.

Where Bannockburn is

Latitude -38.0444706, longitude 144.1733381. Open the map here to read the elevation of any point around the town.

Put this on your site

<a href="https://www.altitude-maps.com/city/12_56,Bannockburn,Victoria,Australia"><img src="https://www.altitude-maps.com/embed/12_56.svg" width="240" height="60" alt="Bannockburn elevation: 118 m (387 ft) above sea level"></a>

A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.

About this reading

The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Bannockburn's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 116 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep.