Elevation of Bakers Hill, Western Australia, Australia
Bakers Hill, Western Australia, Australia is 304 m (997 ft) above sea level.
Bakers Hill's height from sea level is 304 metres, or 997 feet. GeoNames reads 296 m at the same point (SRTM).
Ground within 5 km
Mean 322 m across the 9.4 km square centred on the town, 171 m from its lowest cell to its highest.
Cross-section through Bakers Hill
Ground elevation along two lines through the town, 26.6 km end to end, one cell (about 1 km) per step. The red dot is Bakers Hill; the vertical scale is the same on both.
Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.
Towns near Bakers Hill
| Town | Distance | Direction | Elevation | Compared |
|---|---|---|---|---|
| Wundowie | 7.2 km | W | 272 m (892 ft) | −32 m |
| Toodyay | 21.9 km | N | 150 m (492 ft) | −154 m |
| Chidlow | 22.2 km | SW | 303 m (994 ft) | −1 m |
| Northam | 22.5 km | NE | 156 m (512 ft) | −148 m |
| Mount Helena | 27.7 km | SW | 281 m (922 ft) | −23 m |
Where Bakers Hill is
Latitude -31.7471766, longitude 116.4592313. Open the map here to read the elevation of any point around the town.
Put this on your site
A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.
About this reading
The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Bakers Hill's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 296 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep.