Elevation of Howard Springs, Northern Territory, Australia
Howard Springs, Northern Territory, Australia is 41 m (135 ft) above sea level.
Howard Springs's height from sea level is 41 metres, or 135 feet. GeoNames reads 41 m at the same point (SRTM).
Ground within 5 km
Mean 30 m across the 10.1 km square centred on the town, 39 m from its lowest cell to its highest.
Cross-section through Howard Springs
Ground elevation along two lines through the town, 28.4 km end to end, one cell (about 1 km) per step. The red dot is Howard Springs; the vertical scale is the same on both.
Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.
Towns near Howard Springs
| Town | Distance | Direction | Elevation | Compared |
|---|---|---|---|---|
| Humpty Doo-McMinns Lagoon | 6.1 km | SE | 30 m (98 ft) | −11 m |
| Virginia-Bees Creek | 9.1 km | S | 28 m (92 ft) | −13 m |
| Palmerston | 18.8 km | NW | 33 m (108 ft) | −8 m |
| Darwin | 22.2 km | W | 24 m (79 ft) | −17 m |
Where Howard Springs is
Latitude -12.4950011, longitude 131.0433262. Open the map here to read the elevation of any point around the town.
Put this on your site
A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.
About this reading
The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Howard Springs's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 41 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep.