Elevation of Hill Top, New South Wales, Australia
Hill Top, New South Wales, Australia is 622 m (2,041 ft) above sea level.
Hill Top's height from sea level is 622 metres, or 2,041 feet. GeoNames reads 620 m at the same point (SRTM).
Ground within 5 km
Mean 567 m across the 9.3 km square centred on the town, 301 m from its lowest cell to its highest.
Cross-section through Hill Top
Ground elevation along two lines through the town, 26.2 km end to end, one cell (about 1 km) per step. The red dot is Hill Top; the vertical scale is the same on both.
Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.
Towns near Hill Top
| Town | Distance | Direction | Elevation | Compared |
|---|---|---|---|---|
| Yerrinbool | 4.6 km | E | 480 m (1,575 ft) | −142 m |
| Colo Vale | 5.2 km | S | 667 m (2,188 ft) | +45 m |
| Bargo | 10.5 km | NE | 343 m (1,125 ft) | −279 m |
| Mittagong | 11.4 km | S | 646 m (2,119 ft) | +24 m |
| Buxton | 11.9 km | N | 389 m (1,276 ft) | −233 m |
Where Hill Top is
Latitude -34.3557426, longitude 150.4952011. Open the map here to read the elevation of any point around the town.
Put this on your site
A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.
About this reading
The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Hill Top's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 620 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep.