Elevation of Darlington Point, New South Wales, Australia
Darlington Point, New South Wales, Australia is 123 m (404 ft) above sea level.
Darlington Point's height from sea level is 123 metres, or 404 feet. GeoNames reads 125 m at the same point (SRTM); Wikidata records 125 m.
Ground within 5 km
Mean 125 m across the 9.3 km square centred on the town, 12 m from its lowest cell to its highest.
Cross-section through Darlington Point
Ground elevation along two lines through the town, 26.2 km end to end, one cell (about 1 km) per step. The red dot is Darlington Point; the vertical scale is the same on both.
Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.
Towns near Darlington Point
| Town | Distance | Direction | Elevation | Compared |
|---|---|---|---|---|
| Griffith | 34.4 km | N | 130 m (427 ft) | +7 m |
| Leeton | 38.3 km | E | 147 m (482 ft) | +24 m |
Where Darlington Point is
Latitude -34.5933291, longitude 145.9913248. Open the map here to read the elevation of any point around the town.
Put this on your site
A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.
About this reading
The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Darlington Point's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 125 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep. Wikidata's figure is the one its editors cite for the town, often from a survey marker or the town hall.