Elevation of Brunswick Junction, Western Australia, Australia
Brunswick Junction, Western Australia, Australia is 33 m (108 ft) above sea level.
Brunswick Junction's height from sea level is 33 metres, or 108 feet. GeoNames reads 34 m at the same point (SRTM).
Ground within 5 km
Mean 70 m across the 9.4 km square centred on the town, 234 m from its lowest cell to its highest.
Cross-section through Brunswick Junction
Ground elevation along two lines through the town, 26.4 km end to end, one cell (about 1 km) per step. The red dot is Brunswick Junction; the vertical scale is the same on both.
Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.
Towns near Brunswick Junction
| Town | Distance | Direction | Elevation | Compared |
|---|---|---|---|---|
| Binningup | 18.4 km | NW | 8 m (26 ft) | −25 m |
| Bunbury | 20 km | SW | 17 m (56 ft) | −16 m |
| Harvey | 20.5 km | N | 45 m (148 ft) | +12 m |
| Collie | 31.4 km | E | 193 m (633 ft) | +160 m |
| Stratham | 32.8 km | SW | 15 m (49 ft) | −18 m |
Where Brunswick Junction is
Latitude -33.2581621, longitude 115.8384631. Open the map here to read the elevation of any point around the town.
Put this on your site
A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.
About this reading
The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Brunswick Junction's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 34 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep.