Elevation of Bohle Plains, Queensland, Australia

Bohle Plains, Queensland, Australia is 17 m (56 ft) above sea level.

Bohle Plains's height from sea level is 17 metres, or 56 feet. GeoNames reads 22 m at the same point (SRTM); Wikidata records 22 m.

Ground within 5 km

13 m – 93 m

Mean 25 m across the 9.9 km square centred on the town, 80 m from its lowest cell to its highest.

Rank by elevation

152nd of 218

among the towns of Queensland, and 734th of 1,000 in Australia.

Nearest town

Deeragun

7.9 km to the N, at 16 m, 1 m lower.

Cross-section through Bohle Plains

Ground elevation along two lines through the town, 27.9 km end to end, one cell (about 1 km) per step. The red dot is Bohle Plains; the vertical scale is the same on both.

West to east: from 53 m at 14 km west to 4 m at 14 km east.

North to south: from 0 m at 14 km north to 44 m at 14 km south.

Shaded relief of the 59 km around Bohle Plains, drawn from the GMTED2010 grid — Relief, 59 km across, north up; the ring marks the town.

Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.

Towns near Bohle Plains

Town	Distance	Direction	Elevation	Compared
Deeragun	7.9 km	N	16 m (52 ft)	−1 m
Alice River	9.1 km	W	45 m (148 ft)	+28 m
Bushland Beach	13.7 km	N	10 m (33 ft)	−7 m
Townsville	14.7 km	NE	12 m (39 ft)	−5 m
Pallarenda	15.5 km	NE	20 m (66 ft)	+3 m

Peaks and passes near Bohle Plains

Mount Stuart, peak at 584 m (1,916 ft), 10.4 km to the E — 567 m above the town.

Summit heights from GeoNames (CC BY 4.0), within 25 km; only summits higher than the town are listed.

Where Bohle Plains is

Latitude -19.3149684, longitude 146.691623. Open the map here to read the elevation of any point around the town.

Put this on your site

<a href="https://www.altitude-maps.com/city/12_103,Bohle+Plains,Queensland,Australia"><img src="https://www.altitude-maps.com/embed/12_103.svg" width="240" height="60" alt="Bohle Plains elevation: 17 m (56 ft) above sea level"></a>

A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.

About this reading

The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Bohle Plains's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 22 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep. Wikidata's figure is the one its editors cite for the town, often from a survey marker or the town hall.