Elevation of Bridel, Capellen, Luxembourg

Bridel, Capellen, Luxembourg is 330 m (1,083 ft) above sea level.

Bridel's height from sea level is 330 metres, or 1,083 feet. GeoNames reads 356 m at the same point (SRTM).

Also written: Briddel.

Ground within 4 km

224 m – 375 m

Mean 320 m across the 8.4 km square centred on the town, 151 m from its lowest cell to its highest.

Rank by elevation

15th of 36

among the towns of Capellen, and 196th of 464 in Luxembourg.

Nearest town

1.1 km to the N, at 337 m, 7 m higher.

Cross-section through Bridel

Ground elevation along two lines through the town, 23.7 km end to end, one cell (about 1 km) per step. The red dot is Bridel; the vertical scale is the same on both.

433217WE23.7 km
West to east: from 323 m at 12 km west to 395 m at 12 km east.
433217NS23.7 km
North to south: from 277 m at 12 km north to 293 m at 12 km south.
Shaded relief of the 50 km around Bridel, drawn from the GMTED2010 grid
Relief, 50 km across, north up; the ring marks the town.

Shading is a north-west light over the grid's own slopes. Colour follows elevation: sea level and below, 0–200 m, 500 m, 1,000 m, 2,000 m, 3,500 m, 5,000 m and above.

Towns near Bridel

TownDistanceDirectionElevationCompared
Kopstal 1.1 kmN 337 m (1,106 ft) +7 m
Bereldange (Luxembourg) 2.3 kmE 276 m (906 ft) −54 m
Kehlen 3.3 kmNW 362 m (1,188 ft) +32 m
Walferdange (Luxembourg) 3.7 kmE 244 m (801 ft) −86 m
Steinsel (Luxembourg) 3.8 kmNE 228 m (748 ft) −102 m

Peaks and passes near Bridel

Summit heights from GeoNames (CC BY 4.0), within 25 km; only summits higher than the town are listed.

Where Bridel is

Latitude 49.6557, longitude 6.08326. Open the map here to read the elevation of any point around the town.

Put this on your site

Bridel elevation: 330 m (1,083 ft) above sea level

A small badge with the town's elevation, linking back here. The number updates if the grid reading ever changes.

About this reading

The elevation is the value of the GMTED2010 terrain grid (USGS/NGA, 30 arc-second cells of about 1 km) at Bridel's recorded coordinates. It is the height of the ground in that cell, not of any building; a town on a slope spans several cells, and the range above says how much that matters here. GeoNames' reading of 356 m comes from a finer 90 m SRTM grid at the point it records for the town, which may sit a few hundred metres from ours; the two agreeing to within a few metres is the usual case on flat ground, and a larger gap means the ground is steep.